Sale of materials
Price List
Thermoprofile Neotherm+
Code: M 445
Price from: 10.50 eur
Window mounting profile Neotherm+. These profiles always form a smooth plane that meets the requirements for sealing the connection between structural elements.
AREAS OF USE
For installation of windows in the insulation layer. Installation of windows with removal.
Profiles are easy to process, they are easy to cut. Extremely convenient connection (swallow-shaped). Windows and other products properly installed in the Neotherm+ system maintain the energy efficiency class of the building at least A++.
PROPERTIES
- Resistant to wind, mold, moisture;
- Non-deforming, designed to withstand extremely high loads;
- Prevents frost bridges.
PARAMETERS
High density EPS I high plasticity
PACKAGE
1000x85x80mm
1000x85x100mm
1000x85x120mm
Profile for installing windows Triotherm+
Code: M 409
Price from: 11.50 eur
The main area of application of Triotherm+ profiles is the raising of the masonry frame in the insulating layer of the facade. Triotherm+ thermal profiles are reliably attached and combine forces into the supporting structure. These profiles always form a smooth plane that meets the requirements for sealing the connection between structural elements.
AREAS OF USE
Triotherm⁺ is designed for proper window installation in buildings that meet A+ and A++ energy efficiency class. Triotherm+ profiles can be integrated into the insulation zones of all facade systems.
Profiles are easy to process, they are easy to cut. Extremely convenient connection (swallow-shaped). Windows and other products properly installed in the Triotherm+ system maintain the energy efficiency class of the building at least A++.
PROPERTIES
- Thanks to the dovetail-shaped profiles at the ends of the Triotherm+ system, no waste is left during installation;
- Material cost saving is a significant advantage over other products;
- Due to its low weight and compact size, the blaugelb Triotherm+ thermoprofile is installed extremely quickly and easily;
- Sealing and mechanical fastening to the facade is necessary, but it only takes a few minutes;
- Mildew-resistant, does not rot.
PARAMETERS
High density EPS I high plasticity
PACKAGE
70x85x1175mm Number of units per bundle 9 / pallet 135
100x85x1175mm Number of units per bundle 6 / pallet 90
Tape Penosil internal full adhesive 25m, gray
Code: M 412
Price from: 22.00 eur
Fully adhesive coated internal window sealing tape is designed to cover window and door joints from the inside. Prevents water vapor from penetrating building foam and wall structures and ensures airtightness.
AREAS OF USE
Protection of window and door joints and protection of building structures from moisture in the room.
PROPERTIES
- The material of the joint tape can be plastered and repainted;
- The internal sealing tape of the windows is elastic, resistant to the movement of the wall structure;
- Prevents water vapor from penetrating into the building foam and wall structures;
- Ensures tightness.
GRIP WITH
Wood, concrete, metal, PVC, masonry, various vapor and wind barrier membranes.
PACKAGE
Packed in a cardboard box I 25 m roll I width 70mm /100 mm
Tape Penosil external full adhesive 25m, black
Code: M 420
Price from: 22.00 eur
Fully adhesive coated exterior window sealing tape for sealing window and door joints from the outside. Allows water vapor diffusion from the inside to the outside. Protects the joint and the building structure from wind and moisture.
AREAS OF USE
Protection of window and door joints and protection of building structures against moisture and wind.
PROPERTIES
- The sealing tape can be plastered and repainted;
- Elastic, resistant to the movement of the wall structure;
- Protects the connection and the building structure from the wind.
GRIP WITH
Wood, concrete, metal, PVC, masonry, various vapor and wind barrier membranes.
PACKAGING
Packed in a cardboard box I 25 m roll I width 70mm /100 mm
Glue Power Fix K20/PAL900 white, 600ml
Code: M 415
Price: 11.50 eur
Made from a hybrid polymer with extremely high initial adhesion, it cures quickly. Power Fix adhesive is water, weather and UV resistant, as well as resistant to many chemicals. Due to its extremely fast adhesion, the adhesive can be applied to almost anything (even wet) building materials.
AREAS OF USE
Used as a sealant and adhesive for the installation of blaugelb Triotherm+ thermoprofiles.
Since Power Fix not only has excellent sealing properties, but is also particularly suitable for fixing components, the product is part of the Triotherm+ system for installation in the insulated layer of the wall. They are used for gluing and sealing the joints of window and roller shutter cases, metal products, door frames, windowsills, panels, strips, wood structures and insulating materials.
PROPERTIES
- Excellent initial adhesion to various substrates;
- Weather and UV-resistant adhesive, does not fade, does not crack;
- Exceptionally good adhesion (320 kg / 10 cm2);
- Very good processing, resistant to moisture and temperature changes;
- Permanent elasticity, compensates for unevenness and movements of materials;
- Exceptionally suitable for fast work;
- Does not pass moisture from the outside to the inside;
- Suitable for all standard building surfaces.
GRIP WITH
Metals (steel, aluminum, brass, zinc, etc.), plastics (polycarbonate, PVC, ABS, polyamide, PMMA and GRP), cork, stone, enamel, glass, wood, HPL. Very good for concrete and cement-bonded fiberboard, sand-lime bricks, hollow bricks and aerated concrete. Each time, the substrate must be thoroughly cleaned, free from traces of released oil, etc. There may be incompatibility with natural stone (e.g. discoloration). Do not use on PE, PP, PTFE or silicones.
PARAMETERS
the glue is white
PACKAGE
600 ml I Quantity of units in a carton 20 / in a pallet 900
Polystyrene foam EPS S/033 standard I graphite, 1000x500
Code: M 414
Price from: 55.00 eur
Grey facade polystyrene foam is an effective, convenient for work, long-lasting, non-absorbing moisture, heat-insulating material that does not change its insulating and physical properties. Polystyrene foam maintains constant properties and geometric dimensions during the entire period of operation.
AREAS OF USE
It is used for facade insulation, as an insulating element with a very high thermal insulation coefficient (due to the use of graphite compositions) in places with low mechanical loads:
- thermal insulation of walls with elements that have a coating and a ventilated air hole;
- thermal insulation of external walls in seamless thermal systems, performed by the BSO (light-wet) method;
- thermal insulation of the crown, performed as a formwork under plaster;
- thermal insulation of lintels and frames;
- thermal insulation of the ceiling from below with coating;
- thermal insulation of the ceiling with BSO;
- insulation of pitched roofs between the rafters;
- other uses for which the declared parameters of the final product are suitable;
- declared heat transfer coefficient 0.033 [K/mW].
PROPERTIES
- High thermal resistance;
- Impermeable to moisture and dirt;
- Does not support combustion;
- Recyclable, durable, ecological;
- Resistant to many chemicals;
- Mechanically strong.
PARAMETERS
Polystyrene foam type I EPS S 033
DIMENSIONS
panel dimensions 1000x500
Screws for fastening mounting profiles to masonry FK-T30, Ø7.5mm
Code: M 411
Price from: 29.00 eur
Certified fastening screws for fixing the Triotherm+ profile to the wall.
AREAS OF USE
These screws are also used to fasten the window frame profile.
- Suitable for installation on windows and doors;
- Suitable for all frame materials;
- Can be used without lateral intermediate supports (verified by technical tests);
- For fixing Triotherm+ profiles and auxiliary mounting brackets and supports.
FEATURES
- Designed and tested in the industry;
- Conical thread head;
- Universal use in many building materials;
- Fastening at a distance without lateral intermediate support (tested and certified);
- Suitable for assembly and installation of the Triotherm+ system;
- Optimum transmission of torques with the TX head.
PARAMETERS
Threaded screw with tapered tip I Hardened carbon steel I Flat head
PACKAGE
7.5x132mm Units per box 100
7.5x152mm Units per box 100
7.5x212mm Units per box 100
7.5x252mm Units per box 50
Window and door sealing foam PENOSIL Elastic, 750 ml
Code: M 449
Price: 6.50 eur
Easy-to-use flexible window and door sealing foam for installing and sealing windows and doors. Suitable for non-pressure and moving joints.
AREAS OF USE
- Installation and sealing of windows and doors;
- Filling of highly moving joints and openings;
- Heat and sound insulation;
- Filling of non-pressure-resistant and narrow joints;
- Insulation of ventilation devices and pipes;
- Insulation of non-pressure-resistant and narrow joints and pipes.
PROPERTIES
- Adheres well to various construction materials;
- Adheres to: wood, concrete, plaster, masonry, bricks, plasterboard, most metals, EPS, XPS, roof tiles;
- Elastic, easily compressed, restores original shape after compression;
- Due to the zero impact expansion forces;
- Very suitable for use in light constructions;
- It can be accurately dosed and economically used, it hardens quickly;
- Sound attenuation index - 63 dB;
- It withstands vibrations well;
- Used with a foam gun.
PARAMETERS
Color: green
CAPACITY
Aerosol canister 750 ml
Window mounting plate, suitable for various profiles
Code: M 452
Price: 1.00 eur
Window mounting plate for WDS, SCHUCCO, ALUPLAST, WITAL, KOMMERLING, KBE, GEALAN, VEKA, THYSEN, DECCO, PLASTIMET profiles.
AREAS OF USE
For window installation without removing the glass unit:
For installation of windows made of WDS, SCHUCCO, ALUPLAST, WITAL, KOMMERLING, KBE, GEALAN, VEKA, THYSEN, DECCO, PLASTIMET profiles without removing the glass unit.
DIMENSIONS
25 x 147 mm
Thermoprofile Neotherm+ P
Code: M 447
Price from: 8.50 eur
Window installation profile Neotherm+ P. These profiles always form a smooth plane that meets the requirements for sealing the connection between structural elements.
AREAS OF USE
For installing windows in a heat-insulating layer.
Profiles are easy to process, they are easy to cut. Windows and other products properly installed in the Neotherm + system maintain the energy efficiency class of the building at least A++.
PROPERTIES
- Made of neopore material. Neopore is an improved polystyrene foam, dominated by graphite elements that reflect infrared rays, thus reducing heat loss. The properties of Neopore are up to 20% better than ordinary polystyrene foam. Neopore is one of the most economical thermal insulation materials, the ratio between the energy saved and the energy used for the production of this thermal insulation material is the highest;
- Excellent thermal insulation of the system;
- Excellent sound insulation;
- Precise and convenient connection.
PARAMETERS
High density EPS I high plasticity
PACKAGE
1200x85x60mm
1200x85x150mm
1200x85x200mm
1200x85x250mm
1200x100x200mm
